Hard water stains and mildew that build up in the bathtub and shower are such a challenge to clean. Cleaning it regularly is a must to keep the bathroom always spick and span. It is quite a headache to think of, not to mention a concern if constant scrubbing can damage the bathtub and shower materials. But, what cleaning materials are compatible with these delicate surfaces? Can you use magic eraser on bathtub as you would with other cleaning areas? Wondering if you can use a Magic Eraser on a bathtub and shower? Read all you need to know in our detailed guide.
A magic eraser is a safe cleaning tool to use around the bathtub and shower to maintain its gleam. However, it goes with a little caveat: do not rub the magic eraser forcefully on the surface. Magic erasers, or melamine foams, are gentle abrasives that can clean thoroughly by removing stubborn stains. As long as you use it gently, there is no worry about it scratching the bathtub surfaces.
Can you use magic eraser on bathtub regardless of its material and finish? Here are some of the questions that you may want to ask.
Can You Use a Magic Eraser on a Bathtub?
Bathtub materials vary such that some cleaning solutions may either be safe or damaging for each type. You may have acrylic, porcelain, fiberglass, or cast polymer for a bathtub. It can be daunting to choose the right household cleaning tool and solution that can clean without chipping and scratching them.
Magic eraser is a versatile cleaning tool that is definitely compatible with all these materials. You can use it in cleaning grimes and hard water buildups in your bathtub without altering its delicate features.
Can You Use a Magic Eraser on a Shower?
Yes, you can use melamine foam in cleaning the shower from dirty tiles, dull mirrors, and cloudy glass doors. If you need to get rid of all soap scums and water stains, the magic eraser is a convenient tool for it. Unlike other conventional cleaners, it only takes a little effort to get everything in its pristine condition in just a few swipes.
Glass shower doors, like the bathtub, are also tedious to clean as abrasive tools can easily leave scuff marks on them. But the gentle abrasives of the magic eraser only agitate the dirt particles on the surface to loosen and absorb them. As long as you do not exert force, it works fine without scratching the glass surface of the shower door.
Magic eraser is safe for all types of glass. Thus, you can also use it on your window, mirror, frosted facades, and even glass stovetops.
Is a Magic Eraser Safe for Acrylic Tubs?
Acrylic bathtubs are durable and have non-porous surfaces making them prone to scratches. If you have one, you are probably told never to use any abrasive cleaners and steel wools in cleaning it. But when the need arises, can you use magic eraser on bathtub even with an acrylic surface?
Generally, you can, but be reminded to clean it slowly and avoid aggressive scrubbing that may leave some nasty marks.
Will a Magic Eraser Damage a Fiberglass Tub?
If you do not apply undue pressure while cleaning the fiberglass bathtub, the magic eraser cannot damage its surface. A magic eraser is an excellent tool for removing soap scum and other dried-in stains that other cleaning agents may not.
Fiberglass is not as durable as other bathtub materials. Thus, it needs a mildly abrasive cleaner that does the job without chipping the surface.
Can You Use a Magic Eraser in a Hot Tub?
Yes. In fact, the magic eraser is one of the creative ways you can clean your hot tub without using chemicals. It can tackle nasty gunk, grimes, and grease that pools up inside the tub. However, while other cleaning ideas do not require draining the hot tub, using a magic eraser does. So, if the stain and dirt you want to eliminate are below the water level, drain the tub before scrubbing.
How to Use a Magic Eraser to Clean a Bathtub?
Deep clean your bathtub with the following safety steps using the magic eraser:
1. Lightly wipe or flush the bathtub to remove small particles that may scrape its surface.
2. Wet the magic eraser with water to activate its micro-scrubbers and give it a few squeezes. Do not use any chemicals like bleach, just water.
3. Test an inconspicuous area in the bathtub to be sure the material will not react with the sponge.
4. Lightly, gently, and steadily scrub the sponge in a circular motion across the entire surface of the bathtub.
5. Rinse the bathtub to remove its residues after cleaning.
How to Clean a Shower with a Magic Eraser?
Cut through the dirt, stains and grimes of the shower by scrubbing the surface with a damp magic eraser. Swipe across the surface with a firm grip but with light pressure. You can use it on the faucet, showerheads, tile, grout, and shower doors to keep your shower sparkly clean.
A magic eraser is a magical scrub that cuts through the stains and grimes that accumulate in bathtubs and showers. The bathroom is a high-traffic area of the house and prone to constant soiling. Having a magic eraser in your cleaning cabinet is a handy idea for effortless routine cleaning. With proper use, the magic eraser will remove all stubborn stains while preserving the surfaces of tubs and showers.
Related Magic Eraser Articles:
- Can You Use Magic Eraser on Painted Walls?
- Can You Use a Magic Eraser on Glass?
- Can You Use a Magic Eraser on Dishes?
- Are Mr. Clean Magic Erasers Flammable?
- Melamine Sponge vs Magic Eraser | What’s the Difference?
Jamie is the Founder of My Home Dwelling. He is a homeowner and enjoys sharing his homeowner tips with others. He has real estate experience working as a new home construction Realtor. Jamie has worked on numerous residential construction sites helping with interior and exterior renovations. He loves refinishing furniture, DIY home projects, and sharing his knowledge online.